|
ASPRINN MEMBRANES Model #:TW40-1812-50 Capacity 50 GPD at 60 PSI (FILMTEC MEMBRANE
MATERIAL )
We Suggest to change your membrane every 2 year
FILMTEC reverse osmosis membrane
elements for home drinking water are the industries most reliable. Advanced
membrane technology and automated fabrication allow these elements to deliver
consistent performance that equipment suppliers, water treatment dealers, and
residential customers can rely on. FILMTEC elements are shipped dry for
convenient handling and long shelf-life. These elements are NSF/ANSI Standard
58 listed. Equipment suppliers can take advantage of FilmTecs Standard 58
listing and participation in the NSF Data Transfer Protocol to reduce costs for
reduction claims for their systems. FILMTEC home drinking water
elements are rated at 50 psi and will purify about 20% more water than
competitive elements rated at 60 psi (please see the datasheet for more
information).
|
Product Name
|
Permeate Flow
Rate GPD (m3/d)
|
Stabilized Salt Rejection
(%)
|
Minimum Salt Rejection
(%)
|
|
FILMTEC TW30-1812-50
|
50 (7.9)
|
98.0
|
96.0
|
For technical Data sheet ,
Please click here http://www.maxwaterflow.com/images/TW30-1812-50.pdf
REVERSE OSMOSIS MEMBRANE (FILMTEC MEMBRANE MATERIAL)
|
Dimensions
Inches (mm)
|
|
Product
|
A
|
B
|
C
|
D
|
E
|
|
TW30-2012
|
11.74
(298)
|
0.87
(22)
|
0.68
(17)
|
1.75
(44.5)
|
10.0
(254)
|
General Information -The first full tank of permeate should be
discarded. Do not use this initial permeate for drinking water or food
preparation.
-Keep elements moisturized at all times after
initial wetting.
-If operating limits and guidelines given in this
bulletin are not strictly followed, the limited warranty will be null and void.
-To prevent biological growth during prolonged
system shutdowns, it is recommended that membrane elements be immersed in a
preservative solution.
-The membrane shows some resistance to short-term
attack by chlorine (hypochlorite). Continuous exposure, however, may damage the
membrane and should be avoided.
*The
whole membrane material is made by Filmtec (DOW Chemical Co.) in USA. Membrane
manufacturered by Alspring INC.
*This
is the replacement part for the Fillit Membranes
|
